Habe einen alten mSP der am 19.12.2015 ausläuft den ich nicht mehr benötige.
Daten sind folgende:
RAM: 32 GB
CPU: Intel Xeon E3-1245v2
Mainboard: Intel DH67BL
HDD: 2x2TB (SWR)
IP: 1 + 4 FO
Backup: 500 GB (NFS und CIFS aktiv)
Netzwerkanbindung 1 Gbit/s
Bandbreite OVH/OVH 1 Gbit/s
Bandbreite OVH/Internet 200 Mbit/s
Bandbreite Internet/OVH 1 Gbit/s
Server läuft ohne Probleme und befindet sich schon seit 2013 in meinem Besitz. Beide Festplatten wurden erst vor kurzer Zeit getauscht.
sda
sdb
Falls Ihr Interesse habt, könnt Ihr mir eine Email schreiben: svenevilmoe@yahoo.de
Daten sind folgende:
RAM: 32 GB
CPU: Intel Xeon E3-1245v2
Mainboard: Intel DH67BL
HDD: 2x2TB (SWR)
IP: 1 + 4 FO
Backup: 500 GB (NFS und CIFS aktiv)
Netzwerkanbindung 1 Gbit/s
Bandbreite OVH/OVH 1 Gbit/s
Bandbreite OVH/Internet 200 Mbit/s
Bandbreite Internet/OVH 1 Gbit/s
Server läuft ohne Probleme und befindet sich schon seit 2013 in meinem Besitz. Beide Festplatten wurden erst vor kurzer Zeit getauscht.
sda
Code:
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.32-43-pve] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://ift.tt/w1kREZ
=== START OF INFORMATION SECTION ===
Device Model: HGST HUS724020ALA640
Serial Number: PN2134P6K62U3X
LU WWN Device Id: 5 000cca 22ded0b49
Firmware Version: MF6OAA70
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Nov 21 10:57:09 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 28) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 78
3 Spin_Up_Time 0x0007 136 136 024 Pre-fail Always - 455 (Average 458)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 39
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 140 140 020 Pre-fail Offline - 26
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 2722
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 39
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 65
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 65
194 Temperature_Celsius 0x0002 162 162 000 Old_age Always - 37 (Min/Max 21/47)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 646 -
# 2 Short offline Completed without error 00% 637 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Code:
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.32-43-pve] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://ift.tt/w1kREZ
=== START OF INFORMATION SECTION ===
Device Model: HGST HUS724020ALA640
Serial Number: PN2181P5GR9U7X
LU WWN Device Id: 5 000cca 24eca2501
Firmware Version: MF6OAA70
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Nov 21 10:57:57 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 24) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 138 138 054 Pre-fail Offline - 76
3 Spin_Up_Time 0x0007 140 140 024 Pre-fail Always - 445 (Average 445)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 26
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 145 145 020 Pre-fail Offline - 24
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 2039
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 26
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 30
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 30
194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 38 (Min/Max 25/47)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
0 commentaires:
Enregistrer un commentaire